Solomon echo nutation NMR
applied to a powder:
JDK1.0.2 applet

Home and Applets > JDK1.0.2 Java Applets for Powder > Solomon Echo GoTo Applet

Determination of the quadrupole coupling constant from a featureless NMR lineshape

Solomon echo sequence with pulse lengths p1 and p2 for nutation NMR

In order to detect Solomon echoes, the duration tau2 between the two pulses must be shorter than the duration of the free-induction decay (FID) of the central transition. Solomon echoes are satellite-transition signals superimposed on the FID of the central transition following the second pulse. Single-quantum (SQ) transitions between consecutive energy levels as well as multi-quantum (MQ) transitions between non-consecutive energy levels occur during the excitation of the spin system by the first pulse. SQ and MQ coherences generated by this pulse are converted back to -1Q coherence as echoes of satellite transitions by the second pulse. Solomon echoes are observed in the two channels of the receiver. The observation of the echoes requires the optimization of the two pulse-lengths p1 and p2.

IMAGE: Parameters for the simulation of Solomon echo amplitude

The echo amplitudes in this experiment are a product of two functions: the excitation function A(p1) that depends on p1 and the conversion function B(p2) that depends on p2. In fact, A(p1) is a sum of four coherences generated by the first pulse.

The left part of the simulation panel indicates the physical parameters. It is preset for a typical experiment on a spin I = 3/2 in a powder. You can introduce your own values.

First, we select the pulse sequence with the choice box:
(1) X-X: two in-phase pulses;
(2) Y-X: two pulses in quadrature phase.

Then, we select with the lower choice box one of the two types of echo amplitude calculation:
(1) A(p1)B(): p1 variable and p2 constant;
(2) A()B(p2): p1 constant and p2 variable.

When a pulse length is constant, it should be provided in the MinLength field.

MinLength: the first variable pulse-length in s

MaxLength: the last variable pulse-length in s

Step: the increment of the variable pulse-length in s

Finally, we select the nature of the echo and its position with the two choice boxes above the RUN button. Since echoes are detected in the two channels in quadrature of the receiver, after pressing the RUN button we use the check buttons to choose the real or the imaginary parts of the echo amplitude.

IMAGE: Panel for the selections of NMR transition and Solomon echo position

The following applet is initialized for the satellite echo amplitude A()B(p1) of a spin I = 3/2 in a powder excited by the X-X Solomon echo sequence; this echo is located at tau4 = tau2; the pulse length p1 is equal to 5 s, and p2 increases from 0 to 10 s by 0.5 s step. The experimental line intensities are identical to the simulated ones.


JDK1.0.2 applet for Solomon echo nutation NMR applied to a powder Applet for calculating and fitting the NMR powder echo amplitude of quadrupole spin excited by the two-pulse Solomon echo sequence.
[Contact me] - Last updated July 05, 2011
Copyright 2002- All rights reserved.